Accessories for radiators and underfloor heating

VALTEC Servo motor with built-in controller VALTEC
VALTEC Electrothermal actuator VALTEC no 220
VALTEC Flowmeter 1-4 l/min Eurocone
VALTEC Mounting strip for underfloor heating 0.5m pack. 20 pcs
VALTEC Adapter for manifold cone-flat 1/2
VALTEC Trim valve with flow meter, manifold, built-in for VTc.596 and 586
VALTEC Adapter 3/4 eurocone x 1/2 for VALTEC bottom radiator connection
VALTEC Tape FUM for water 12mm*0.10mm*10m VALTEC
VALTEC Eurocone for copper pipe 15-3/4 VALTEC
VALTEC Thermostatic head with external contact sensor 2 m, dia. 20 - 60° C
VALTEC Eurocone for Al pipes 20 2.0 x 3/4 VALTEC
VALTEC Electrothermal servomotor VALTEC NC 220 М30×1.5, 2 contacts
VALTEC Controller for mixing units VT.K200.M
VALTEC Bracket for steam collectors 3/4
VALTEC Sleeve for immersion temperature sensor 1/2*64mm VALTEC
Thermostatic liquid head VALTEC VT.5000.0
Thermoregulatory mounting kit VALTEC ICBOX-5
Angled thermostatic valve VALTEC VT.031.N.05 3/4 NRsh x 3/4 VRg for radiator
Thermostatic valve VALTEC VT.179.N, 1/2, with axial control, angle
Zone Communicator Valtec VT. ZC8.0.220
Nipple with transition 1/2 x 3/4, Euroconus on.r-nar. VALTEC
Angular control unit VALTEC VT.225K.N.E04100 1/2 НРш x 3/4 EK for a radiator with side connection for two-pipe systems
Thermal head VALTEC VT.5000.0.0 M30x1.5 mm for liquid radiator
Valtec Solid state thermostatic head
Servo drive Valtec electrothermal, normally open 220 V M30 x 1.5
Valtec Wrench for manifold fittings 24/27 mm
Valtec Immersion thermometer 1/2
Valtec Adjusting valve with flow meter built-in for manifold block VTc.589
Set of thermoregulating equipment d / rad., angular 1/2" thermostatic head, thermostatic valve, shut-off valve VALTEC
Valtec Pair of Stainless Steel Manifold Brackets 1
Knot for lower conn. glad. VALTEC kit
Electrothermal actuator, normally open, 24 V VALTEC VT.TE3041.A.024
Thermal head dia. regulators 6.5 - 27.5°C solid state VALTEC
Zone communicator 24 V, VALTEC VT.ZC8.0.24
Electrothermal actuator, normally closed 24 V VALTEC VT.TE3043.0.024
Adjusting valve control valve for manifold block VALTEC VT.VDC31.N.0
The valve thermostatic for is glad. corner 1/2 with add. VALTEC seal
The valve thermostatic for is glad. straight 1/2 with add. VALTEC seal
Thermal head dia. regulators 6.5 - 28°C liquid VALTEC
Flowmeter VALTEC 1-4 l/min Eurocone VT. FLC15.0.0
Staples for tacker cassette 50 pcs 12-20mm, VT.KS.P.1620
Pair of high brackets for stainless steel manifolds, 1, VTc.130.INH.0600
Thermoregulatory mounting kit ICBOX-1, VALTEC VT.ICBOX.1.0
Thermoregulatory mounting kit ICBOX-5, VALTEC VT.ICBOX.5.0
Collector outlet 3/4х1/2 VALTEC
Brackets for stainless steel manifolds, 1, VTc.130.IN.0600
Pair of low brackets for stainless steel manifolds, 1 1/2, VTc.130.INS.0800
Eurocone for PEX pipes 162.2 VALTEC VT.4410.NE.1622
Rotation lock 90°, 20 mm VALTEC
Rotary lock 90°, 16 mm VALTEC
Radiator thermostatic valve straight 1/2 with additional seal VALTEC
Thermostatic assembly for lower radiator connection, two-pipe system set VALTEC 1/2x100% VALTEC
Euroconus for layer. pipes 202.8, Eurocone VALTEC for pipe layer 202.8, VT.4410.NE.2028
Radiator thermostatic valve 1/2 VALTEC
Radiator valve VALTEC thermostatic angle 1/2 with additional seal
Radiator thermostat Valtec VT.047. N.04 1/2 corner
Electrothermal actuator VALTEC, normally closed, 220 V supply VT.TE3042.0.220
Normally open electrothermal servo drive 220V VALTEC VT.TE3042.A.220
Electrothermal actuator, normally open, 220 V VALTEC VT.TE3040A.0.220
Electrothermal analogue actuator, normally closed, 24 / 0–10 V VALTEC VT.TE3061.0.024
Electrothermal actuator, normally closed, 220 V VALTEC VT.TE3040.0.220
Electrothermal actuator, normally closed, 24 V VALTEC VT.TE3041.0.024
Pair of brackets for manifolds 1 VALTEC
Thermoregulatory mounting kit ICBOX-4, VALTEC VT.ICBOX.4.0
Electrothermal two-position servo normally open 24 V. VALTEC VT.TE3043.A.024
Electrothermal two-position servo normally open 220 V. VALTEC VT.TE3043.A.220
VALTEC wrench for double nipple 1- 1 1/4
Thermoregulatory mounting kit ICBOX-2, VALTEC VT.ICBOX.2.0
Thermal head adjustment range 6.5 - 28*, liquid VALTEC
Thermal head with remote overhead sensor adjustment range 20-60s 2m. VALTEC VT.5012.0.0
Thermal head with remote immersion sensor adjustment range 20-60s 2m. VALTEC VT.5011.0.0
Thermostatic angle valve VALTEC with axial control 1/2 VT.179.N.04
Thermostatic assembly for lower radiator connection, one-pipe system set 1/2x50% VALTEC
Angled 1/2 x 3/4 Eurocone lower radiator connection unit with VALTEC adapter kit
Radiator thermostatic valve straight 1/2 VALTEC
Valve manual direct 3/4 compact VALTEC
Valve with thermostatic head for radiators, straight 1/2 VALTEC
Tucker VALTEC for fastening floor heating pipes, 16–20 mm, VT.T.01.1620
Connection VALTEC VT.0606.0.06
Radiator thermostatic valve 3/4 angle VALTEC
VALTEC solid state thermal head with adjustment range 6.5 - 27.5
Adjustment valve with flow meter built-in for manifold block VTc.589 0.5–5.0 l/min VALTEC
Thermostatic valve VALTEC VT.032.N.05
Thermal head for radiator VALTEC VT.3000.0.0
Valtec Thermostatic angle valve with axial control 1/2
Valtec Eurocone-flat adapter 1/2
Valtec Pair of Manifold Brackets 1
Adjusting valve for radiator VALTEC VT.019.N.04
Pumping and mixing unit for underfloor heating VALTEC COMBI. S
Pumping and mixing unit for underfloor heating VALTEC TECHNOMIX
Thermostatic head Valtec with remote sensor 2m
Valtec Servo VT. TE3041 electrothermal, normally open 24 V M30 x 1.5
Servo drive Valtec electrothermal, normally closed 24 V М30×1.5
Valtec Angle adjusting valve with additional seal 1/2
Valtec Branch manifold 3/4 x 1/2
Servo drive Valtec electrothermal, normally closed 220 V М30×1.5
Valtec manifold tee 3/4 x 1/2 x 1/2
Valtec Temperature control mounting modules VT. ICBOX-2
Valtec Radiator valve polypropylene angle 25 x 3/4
Valtec Pair of manifold brackets 1'
Hello! Item Wiki wishes you all the best. | Privacy policy | Terms of use