|
| Weight: |
14.4 kg
|
| Depth: |
350 mm
|
| Brand: |
Advance Acoustic
|
| Description: |
Type: integrated amplifier, standard: stereo, front channel power: 160 W/channel, circuit design: solid state, connectors and interfaces: USB Type-A, USB Type-B, Preamp input, audio coaxial input x 2, audio line stereo input
|
| Transformer type: |
Toroidal
|
| Width: |
430
|
| Height: |
175
|
| Power consumption: |
500 W
|
| Peculiarities: |
Built-in DAC, display, connection of additional sets of acoustics, remote control
|
| Additional Information: |
Optional receiver WTX-500
|
| Type: |
Integrated amplifier
|
| Harmonic coefficient: |
0.1 %
|
| Dynamic Range: |
70 dB
|
| Signal to noise ratio: |
90 dB
|
| Connectors and interfaces: |
USB Type-A, USB Type-B, Preamp in, Coaxial audio in x 2, Stereo audio in x 7, Optical audio in, Phono stage in, Preamp out, Stereo audio in line, Headphone out - 6.3 mm jack
|
| Standard: |
Stereo
|
| Number of channels: |
2
|
| Power: |
160W/channel
|
| Bit depth audio DAC: |
24 bit
|
| Phono stage: |
MM
|
| Sound setting functions: |
Balance control, tone control, loudness
|
| Audio DAC sample rate: |
192 kHz
|
| Connectors on the front panel: |
Headphone output
|
| Lin sensitivity. entrance: |
300 mV
|
| Input impedance lin. entrance: |
47 kOhm
|
| Maximum playback frequency: |
35000 Hz
|
| Minimum repeatable frequency: |
10 Hz
|
| Recommended load resistance max.: |
16 ohm
|
| Recommended load resistance min.: |
4 ohm
|
| Circuit design: |
Semiconductor
|