|
| Weight: |
6.5 kg
|
| Depth: |
290 mm
|
| Brand: |
NAD
|
| Description: |
Type: integrated amplifier, standard: stereo, power of the front channels: 50 W/channel, circuitry: solid-state, connectors and interfaces: Preamp input, Preamp output, audio linear stereo output x 3, headphone output - jack 6.3
|
| Transformer type: |
Toroidal
|
| Width: |
435
|
| Height: |
100
|
| Peculiarities: |
Remote control, system bus control
|
| Additional Information: |
Gain level - 29dB; headphone output impedance - 200 Ohm
|
| Type: |
Integrated amplifier
|
| Harmonic coefficient: |
0.03 %
|
| Signal to noise ratio: |
117 dB
|
| Connectors and interfaces: |
Preamp input, Preamp output, audio line stereo output x 3, headphone output - jack 6.3 mm, trigger output
|
| Standard: |
Stereo
|
| Number of channels: |
2
|
| Power: |
50W/channel
|
| Phono stage: |
No
|
| Sound setting functions: |
Balance control, tone control, direct mode
|
| Connectors on the front panel: |
Headphone output
|
| Lin sensitivity. entrance: |
220 mV
|
| Input impedance lin. entrance: |
200 kOhm
|
| Maximum playback frequency: |
20000 Hz
|
| Minimum repeatable frequency: |
20 Hz
|
| Peak power front channels: |
68 W/channel
|
| Recommended load resistance min.: |
4 ohm
|
| Circuit design: |
Semiconductor
|