|
| Weight: |
24 kg
|
| Depth: |
423 mm
|
| Brand: |
NAD
|
| Description: |
Type: AV receiver, standard: 7.1, front channel power: 145 W/channel, circuitry: solid-state, music playback: built-in DAC, connectors and interfaces: RS-232, Preamp input, optical audio input x 2, video com input
|
| Transformer type: |
Toroidal
|
| Width: |
435
|
| Height: |
195
|
| Peculiarities: |
FM tuner, built-in DAC, display, connection of additional acoustic kits, remote control, system bus control, on-screen menu
|
| Additional Information: |
2 remote controls included: main - HTR2 and additional - ZR2
|
| Type: |
AV receiver
|
| Harmonic coefficient: |
0.08 %
|
| Signal to noise ratio: |
90 dB
|
| Connectors and interfaces: |
RS-232, Preamp in, Optical audio in x 2, Component video in x 3, Trigger in, 7.1CH out, Preamp out, Line stereo audio out x 4, Component video out, 6.3mm headphone out, subwoofer x 2
|
| Standard: |
7.1
|
| Number of channels: |
7
|
| Power: |
145 W/channel
|
| Music playback: |
Built-in DAC
|
| Bit depth audio DAC: |
24 bit
|
| Phono stage: |
No
|
| Sound setting functions: |
DSP, Balance Control, Tone Control, Direct Mode
|
| Audio DAC sample rate: |
96 kHz
|
| Connectors on the front panel: |
Stereo audio input, composite video input, headphone output
|
| Lin sensitivity. entrance: |
400 mV
|
| Input impedance lin. entrance: |
50 kOhm
|
| Maximum playback frequency: |
20000 Hz
|
| Minimum repeatable frequency: |
5 Hz
|
| Recommended load resistance min.: |
4 ohm
|
| Circuit design: |
Semiconductor
|