AV receiver TEAC AG-D200

Weight: 9 kg
Depth: 328 mm
Brand: TEAC
Description: Type: AV receiver, standard: 7.1, front channel power: 120 W/channel, circuit design: solid state, music playback: built-in DAC, connectors and interfaces: HDMI input x 4, audio coaxial input x 2, audio line input
Width: 435
Height: 150
Power consumption: 530 W
Peculiarities: FM tuner, display, remote control
Additional Information: Sound correction technologies: Audyssey 2EQ, Audyssey Dynamic EQ, Audyssey Dynamic Volume; supported formats MP3, WMA, AAC, FLAC; 3D Ready; compatible with iPhone/iPod
Type: AV receiver
Harmonic coefficient: 0.08 %
Signal to noise ratio: 100 dB
Connectors and interfaces: Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
Standard: 7.1
Number of channels: 7
Power: 120W/channel
Music playback: Built-in DAC
Bit depth audio DAC: 24 bit
Sound setting functions: DSP, Balance Control, Tone Control, Direct Mode
Audio DAC sample rate: 192 kHz
Connectors on the front panel: Composite video input, headphone output
Lin sensitivity. entrance: 200 mV
Input impedance lin. entrance: 47 kOhm
Maximum playback frequency: 100000 Hz
Minimum repeatable frequency: 5 Hz
Recommended load resistance max.: 16 ohm
Recommended load resistance min.: 6 ohm
Circuit design: Semiconductor