|
| Weight: |
11 kg
|
| Depth: |
394 mm
|
| Brand: |
KENWOOD
|
| Description: |
Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
|
| Width: |
440
|
| Height: |
166
|
| Power consumption: |
275 W
|
| Peculiarities: |
FM tuner, display, connection of additional sets of acoustics, remote control
|
| Additional Information: |
Dolby Virtual Speaker decoder
|
| Type: |
AV receiver
|
| Harmonic coefficient: |
0.009 %
|
| Signal to noise ratio: |
105 dB
|
| Connectors and interfaces: |
Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
|
| HDMI Version: |
1.3a
|
| Standard: |
7.1
|
| Number of channels: |
7
|
| Power: |
100W/channel
|
| Music playback: |
Built-in DAC
|
| Bit depth audio DAC: |
24 bit
|
| Phono stage: |
No
|
| Sound setting functions: |
DSP, tone control, direct mode, equalizer
|
| Audio DAC sample rate: |
96 kHz
|
| Connectors on the front panel: |
Stereo audio input, composite video input, headphone output
|
| Lin sensitivity. entrance: |
550 mV
|
| Input impedance lin. entrance: |
25 kOhm
|
| Maximum playback frequency: |
100000 Hz
|
| Minimum repeatable frequency: |
10 Hz
|
| Recommended load resistance max.: |
16 ohm
|
| Recommended load resistance min.: |
6 ohm
|
| Circuit design: |
Semiconductor
|