AV receiver YAMAHA RX-V2600

Weight: 17.4 kg
Depth: 438 mm
Brand: YAMAHA
Description: Type: AV receiver, standard: 7.1, front channel power: 190 W/ch, circuitry: solid state, music playback: built-in DAC, connectors and interfaces: RS-232, 7.1CH input, HDMI input x 2, component video input x 3, in
Width: 435
Height: 171
Power consumption: 500 W
Peculiarities: Bi/Tri-amping, FM tuner, built-in DAC, display, connection of additional acoustic kits, remote control, system bus control, on-screen menu
Additional Information: Only high-output MC pickups are supported
Type: AV receiver
Channel separation: 65 dB
Harmonic coefficient: 0.04 %
Signal to noise ratio: 100 dB
Connectors and interfaces: RS-232, 7.1CH input, HDMI input x 2, Component video input x 3, Phono input, HDMI output, Preamp output, Component video output, Headphone output - 6.3 mm jack, Subwoofer output, Trigger output x 2
Standard: 7.1
Number of channels: 7
Power: 190 W/channel
Music playback: Built-in DAC
Bit depth audio DAC: 24 bit
Phono stage: MC/MM
Sound setting functions: DSP, Balance Control, Tone Control, Direct Mode, Loudness, EQ
Audio DAC sample rate: 192 kHz
Connectors on the front panel: Stereo audio input, optical audio input, composite video input, headphone output
Lin sensitivity. entrance: 200 mV
Input impedance lin. entrance: 47 kOhm
Maximum playback frequency: 100000 Hz
Minimum repeatable frequency: 10 Hz
Recommended load resistance max.: 8 ohm
Recommended load resistance min.: 6 ohm
Circuit design: Semiconductor