|
| Weight: |
4.4 kg
|
| Depth: |
505 mm
|
| Brand: |
Denon
|
| Description: |
Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
|
| Transformer type: |
Toroidal
|
| Width: |
434
|
| Height: |
280
|
| Power consumption: |
850 W
|
| Peculiarities: |
Bi/Tri-amping, built-in DAC, display, remote control, SBus control, OSD
|
| Additional Information: |
Input 9.1CH - 1, output 9.1CH - 1
|
| Type: |
AV amplifier
|
| Harmonic coefficient: |
0.005 %
|
| Signal to noise ratio: |
105 dB
|
| Connectors and interfaces: |
Ethernet - RJ-45, RS-232, 5.1CH input, HDMI input x 5, Mic input x 6, Phono input, HDMI output, Preamp output, Headphone output - 6.3 mm jack, Subwoofer output x 2
|
| Number of channels: |
10
|
| Power: |
220W/channel
|
| Music playback: |
Built-in DAC, internet radio
|
| Bit depth audio DAC: |
24 bit
|
| Phono stage: |
MM
|
| Sound setting functions: |
DSP, balance control, tone control, direct mode, equalizer
|
| Audio DAC sample rate: |
192 kHz
|
| Connectors on the front panel: |
Stereo audio input, optical audio input, composite video input, headphone output
|
| Lin sensitivity. entrance: |
200 mV
|
| Input impedance lin. entrance: |
47 kOhm
|
| Maximum playback frequency: |
100000 Hz
|
| Minimum repeatable frequency: |
10 Hz
|
| Recommended load resistance max.: |
16 ohm
|
| Recommended load resistance min.: |
6 ohm
|
| Circuit design: |
Semiconductor
|