Denon AVC-A11XVA AV Amplifier

Weight: 23.6 kg
Depth: 500 mm
Brand: Denon
Description: Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
Transformer type: Toroidal
Width: 434
Height: 178
Power consumption: 610 W
Peculiarities: Bi/Tri-amping, built-in DAC, display, connection of additional acoustic kits, remote control, system bus control, on-screen menu
Additional Information: Only "high-output" MC pickups are supported
Type: AV amplifier
Harmonic coefficient: 0.005 %
Signal to noise ratio: 102 dB
Connectors and interfaces: Ethernet - RJ-45, RS-232, 7.1CH in, HDMI in x 3, Component video in x 3, Phono input, 7.1CH out, HDMI out, Preamp out, 6.3mm headphone out, subwoofer out
Standard: 7.1
Number of channels: 7
Power: 195 W/channel
Music playback: Built-in DAC, internet radio
Bit depth audio DAC: 24 bit
Phono stage: MC/MM
Sound setting functions: DSP, Balance Control, Tone Control, Direct Mode, Loudness, EQ
Audio DAC sample rate: 192 kHz
Connectors on the front panel: Stereo audio input, optical audio input, composite video input, headphone output
Lin sensitivity. entrance: 200 mV
Input impedance lin. entrance: 47 kOhm
Maximum playback frequency: 100000 Hz
Minimum repeatable frequency: 10 Hz
Recommended load resistance max.: 16 ohm
Recommended load resistance min.: 6 ohm
Circuit design: Semiconductor