|
| Weight: |
9.2 kg
|
| Depth: |
331 mm
|
| Brand: |
Onkyo
|
| Description: |
Type: integrated amplifier, standard: stereo, front channel power: 60 W/channel, circuit design: solid state, music playback: built-in DAC, connectors and interfaces: preamp input, audio coaxial input x
|
| Transformer type: |
Ш-shaped
|
| Width: |
435
|
| Height: |
139
|
| Power consumption: |
160 W
|
| Peculiarities: |
Bi/Tri-amping, connection of additional sets of acoustics, remote control, system bus control
|
| Type: |
Integrated amplifier
|
| Harmonic coefficient: |
0.08 %
|
| Signal to noise ratio: |
107 dB
|
| Connectors and interfaces: |
Preamp input, audio coaxial input x 2, stereo audio line input x 4, optical audio input x 2, phono stage input, Preamp output, stereo audio line output, headphone output - jack 6.3 mm
|
| Standard: |
Stereo
|
| Number of channels: |
2
|
| Power: |
60W/channel
|
| Music playback: |
Built-in DAC
|
| Bit depth audio DAC: |
32 bit
|
| Phono stage: |
MC/MM
|
| Sound setting functions: |
DSP, Balance Control, Tone Control, Direct Mode
|
| Audio DAC sample rate: |
384 kHz
|
| Connectors on the front panel: |
Headphone output
|
| Lin sensitivity. entrance: |
200 mV
|
| Input impedance lin. entrance: |
220 kOhm
|
| Maximum playback frequency: |
100000 Hz
|
| Minimum repeatable frequency: |
10 Hz
|
| Peak power front channels: |
90 W/channel
|
| Recommended load resistance max.: |
16 ohm
|
| Recommended load resistance min.: |
4 ohm
|
| Circuit design: |
Semiconductor
|