|
| Weight: |
20 kg
|
| Equipment: |
Display, room thermostat
|
| Description: |
Type of heating boiler: electric, max. thermal power: 12 kW, number of circuits: single-circuit, placement: wall-mounted, fuel: no, type of combustion chamber: no, type of power supply: three-phase, control: electronic,
|
| Peculiarities: |
Air vent, built-in expansion tank, built-in circulation pump, pressure gauge, safety valve, connector for external control, thermometer, water filter
|
| Additional Information: |
Complete set: boiler - 1 pc., ground cable connection lug - 1 pc., PG19 cable gland - 1 pc., PG21 cable gland - 1 pc., remote room temperature sensor in a housing with a supply wire
|
| Control: |
Electronic
|
| Dimensions WxHxD: |
430x730x200mm
|
| Installation: |
Wall-mounted
|
| Fuel: |
No
|
| Mains voltage: |
Three-phase
|
| Thermal power: |
3 - 12 kW
|
| Heated area: |
120 sq.m
|
| Heating element for temperature maintenance: |
Optional
|
| Secondary heat exchanger material: |
Stainless steel
|
| Max. water pressure in the DHW circuit: |
2 bar
|
| Max. thermal load: |
12 kW
|
| Maximum current 1F/3F: |
32 A/18 A
|
| Power steps: |
3
|
| Temperature in the DHW circuit: |
5 - 80 °С
|
| Heat carrier temperature: |
5 - 80 °С
|
| Expansion tank volume: |
8 l
|
| Burner: |
No
|
| Coaxial chimney diameter: |
No
|
| Gas connection: |
No
|
| Branch pipe for connecting the DHW circuit: |
1¼
|
| Heating circuit connection: |
1"
|
| Number of circuits: |
Single-circuit, bithermic heat exchanger
|
| Primary heat exchanger material: |
Stainless steel
|
| Type of heating boiler: |
Electric, heater
|
| Recommended fuel: |
No
|
| Fuel for automatic feeding: |
No
|