|
| Weight: |
7.7 kg
|
| Depth: |
342 mm
|
| Brand: |
Rotel
|
| Description: |
Type: integrated amplifier, standard: stereo, front channels power: 60 W/channel, circuitry: solid-state, connectors and interfaces: stereo audio line input x 6, phono stage input, Preamp output, audio l output
|
| Transformer type: |
Toroidal
|
| Width: |
435
|
| Height: |
92
|
| Power consumption: |
300 W
|
| Peculiarities: |
Connection of additional sets of acoustics, remote control, control via system bus
|
| Additional Information: |
Preamplifier output: voltage - 1V, resistance - 470 Ohm
|
| Type: |
Integrated amplifier
|
| Harmonic coefficient: |
0.03 %
|
| Signal to noise ratio: |
100 dB
|
| Connectors and interfaces: |
Stereo audio input x 6, phono stage input, preamp output, stereo audio linear output x 2, headphone output - jack 6.3 mm, trigger output x 2
|
| Standard: |
Stereo
|
| Number of channels: |
2
|
| Power: |
60W/channel
|
| Phono stage: |
MM
|
| Sound setting functions: |
Balance control, tone control, direct mode
|
| Connectors on the front panel: |
Headphone output
|
| Lin sensitivity. entrance: |
150 mV
|
| Input impedance lin. entrance: |
24 kOhm
|
| Maximum playback frequency: |
100000 Hz
|
| Minimum repeatable frequency: |
10 Hz
|
| Recommended load resistance min.: |
4 ohm
|
| Circuit design: |
Semiconductor
|