AV receiver YAMAHA RX-V757

Weight: 12.5 kg
Depth: 420 mm
Brand: YAMAHA
Description: Type: AV receiver, standard: 5.1, front channel power: 35 W/channel, circuitry: solid-state, connectors and interfaces: 5.1CH input, stereo audio line input x 2, composite video input x 2, microphone input x 6, output ay
Width: 435
Height: 171
Power consumption: 440 W
Peculiarities: FM tuner, built-in DAC, display, connection of additional acoustic kits, remote control, system bus control, on-screen menu
Additional Information: Only high-output MC pickups supported, built-in Delay 0-160ms
Type: AV receiver
Channel separation: 60 dB
Harmonic coefficient: 0.06 %
Signal to noise ratio: 100 dB
Connectors and interfaces: 7.1CH in, Coaxial audio in x 2, Component video in x 2, Phono input, Preamp out, Line stereo audio out x 4, Component video out, 6.3mm headphone out, Subwoofer out, Trigger out
Standard: 7.1
Number of channels: 7
Power: 150W/channel
Music playback: Built-in DAC
Bit depth audio DAC: 24 bit
Phono stage: MC/MM
Sound setting functions: DSP, Balance Control, Tone Control, Direct Mode, Loudness, EQ
Audio DAC sample rate: 192 kHz
Connectors on the front panel: Stereo audio input, optical audio input, composite video input, headphone output
Lin sensitivity. entrance: 200 mV
Input impedance lin. entrance: 47 kOhm
Maximum playback frequency: 100000 Hz
Minimum repeatable frequency: 10 Hz
Recommended load resistance max.: 16 ohm
Recommended load resistance min.: 4 ohm
Circuit design: Semiconductor